Vivint Element CT200, Installation Manual, Page: 9 / 46

Wiring
Vivint Element CT200 Installation Guide
C
W
RH
G
Y
Attaching the Mounting Plate to the wall
1 . Carefully pull the labeled wires through the center hole in the
mounting plate .
2 . Position thermostat for best appearance to cover the hole in the
wall .
3 . Mark first and drill a ¼ in. (6mm) hole at each screw location.
4 . If you are mounting the Thermostat to sheet rock or if you are
using the old mounting holes, use the plastic anchors provided .
5 . Attach the Thermostat to the wall with the screws provided .
9