Vivint Element CT200, Installation Manual, Page: 18 / 46

Setup
3
Vivint Element CT200 Installation Guide
Selecting HVAC & Heat Types
1 . From the Thermostat’s Home
screen, press and hold the
SIDE button for 3 seconds .
The Settings menu opens .
2 . Highlight Installer, then press
the SIDE button . The Install
Settings menu opens .
3 . Highlight Equipment, then
press the SIDE button . The
Equipment menu opens .
4 . Highlight Heating, then press
the SIDE button . The Heating
menu opens .
5 . Under Heating Type, press
the SIDE button until your
heating type is displayed:
Forced Air, Heat Pump,
Hydronic, or Radiator .
6 . Under Fuel, press the SIDE
button until your heating
fuel is displayed: Natural
Gas, Propane, Fuel Oil, or
Geothermal and Electric . For
Heat Pump systems, this field
is labeled Aux . Fuel .
7 . Under Stages, press the
SIDE button until your
system’s heating stage type is
displayed: 1 (single), 2 (dual),
1 + Auxiliary, or 2 + Auxiliary .
For Heat Pump systems, this
field is labeled Aux. Stages.
Note: Auxiliary stages are only
available if you select Heat Pump
as the heating type .
Selecting Heat Pump Settings
1 . From the Thermostat's Home
screen, press and hold the
SIDE button for 3 seconds .
The Setting menu opens .
2 . Highlight Installer, then press
the SIDE button . The Install
Settings menu opens .
3 . Highlight Equipment, then
press the SIDE button . The
Equipment menu opens .
4 . Highlight Heat Pump, then
press the SIDE button . The
Heat Pump menu opens .
5 . Highlight Wire, then select the
letter corresponding to the
terminal the Heat Pump is
connected to: O or B .
6 . Under Stages, press the
SIDE button until your
system's heating stage type
is displayed: 1 (single), or 2
(dual) .
HEATING
TYPE
FUEL
Forced Air
Natural Gas
1
STAGES
Heat Types
18