Operation Controls and Functions
Front Panel
1.
POWER-
Press this button to switch the unit On or Off.
2. VIDEO SOURCE SELECTION-
Select the video source between TV/Cable,
S-Video, AV, Component (Y, Cb, Cr) or PC.
3. POWER LED / INFRARED RECEIVER-
Lights when the TV BOX is powered up
and ready to operate. Receive the Infrared signal from the remote control.
4. : -
Decrease the sound volume.
5. :
-Increase the sound volume.
6. :
-Adjust channel decrease.
7. :
Adjust channel increase.
Rear Panel
1.
DC In-
Connect to a 12V power supply.
2.
VGA Out-
Connect your 15-pin Monitor to the VGA output.
3.
VGA In-
Using the 15-pin VGA cable provided, connect one side to the VGA
output on your PC and the other side to the VGA In of your TV BOX.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
