OmniFlow 330
6 Trouble shooting
6.1 C-5 no paper
As shown in the following figure, there is a sensor for the detection of sheets. When
the sensor detect no sheets on the table, it will come up C-5.
6.2 C-2 infeed jam
（
1
）
C-2 comes up without any sheet getting stuck
As shown in the following figure, the sensor may be covered by paper dust. So you
may need to do some cleaning for the sensor. Make sure the upper and bottom
sensors are in one line. If it still didn’t work, then the sensors itself may have issue.
Note
：
There may exist a lot of dust on it after a long time use.
（
2
）
C-2 comes up during running.
Machine is running without feeding for a long while.
15
