Operating manual Omni-Flow
Edition 1.0. 09/2017
26 / 32
10-2-0 Menu Information
10-2-1 Menu Software information 1
10-4-0 Menu Spacing
If spacing is switched off, or if the sheet length is changed, the values for vacuum length and sheet distance
are automatically set to default values.
Menu Software infor-
mation
IP address if connect-
ed with active DHCP.
NetBios name for ac-
cess via Explorer
Physical MAC address
Display menu Custom-
er service / Info / Ser-
vice.
Display menu Custom-
er service / Info / Ser-
vice.
Machine type:
Folding and creasing
section
Menu Warnings: The
button is only available
if there is an active
malfunction.
Total counter
not resettable
Switching spacing on
and off
(marked in red
= off)
.
Menu Vacuum length;
can only be selected
when spacing is active.
Menu Sheet distance;
can only be selected
when spacing is active.
Single sheet
Discard modification
and display menu Cus-
tomer service / Info /
Service.
Apply modifications
and display menu Cus-
tomer service / Info /
Service.
SW version and date
of creation of the dis-
play.
SW version of the
feeder (display if avail-
able).
Display menu Informa-
tion.
Display menu Custom-
er service / Info / Ser-
vice.
Change to the next
menu SW information.
Omni-Flow
