5
The CLR-102 incorporates the Miniature Camera Link (miniCL) connector widely used in
PoCL cameras and frame grabbers. miniCL cables as well as adapting cables (i.e. one end
standard MDR style, one end miniCL) are readily available from Camera Link cable
suppliers.
The CLR-102 adds minimal delay (i.e. latency) to the video data path. This is an
important criterion for time-critical applications. The latency through the CLR-102 is a
fixed 3 pixel-clock delay. The pixel clock is established by the camera and can range from
20-85 MHz. Therefore, the CLR-102 fixed delay can range from 35 to 150 nS, depending
on camera. The delay added by the CLR-102 for the camera control and serial
communication signals is under 5 nS.
The CLR-102 detects the presence of an active Camera Link camera. When an active (i.e.
powered) camera is detected, the front-panel “link” indicator illuminates. The front panel
also includes a power indicator to show that the CLR-102 is powered.
The CLR-102 is powered by an external multi-nation wall plug-in power supply. The
locking power supply connector reduces the risk of an accidental disconnect.
For information about PoCL and SafePower, please see the Camera Link Specification.
