11
2.2.
Rear Panel Connections
The CLR-102 Camera Link Repeater rear panel is shown in Figure 2-3. The rear panel
contains a 26-pin miniCL video connector for connecting to the frame grabber and a DC
power jack. The miniCL connector is a 3M device as specified in the Camera Link Spec.
The DC power jack is a circular locking type, Switchcraft p/n TRASM3MX. The DC
power jack accepts regulated 12 volts DC. Power jack pin assignments are shown in
Figure 2-4. The mating DC power plug is Switchcraft p/n TA3FX.
Camera Link Repeater
12 VDC
FRAME GRABBER
Figure 2-3: CLR-102 Rear Panel
pin 1,
unused
pin 2, ground
pin 3, +12 vdc
Figure 2-4: Power Jack Pins
