Installation
free flex, User manual & Installation guide
page of
6
11
Step 1.3
Screw the standpipe to the stand.
! Note: The stand is mounted on the right-angled side
of the tube.
Step 1.4
Now run the cable through the recess in the cover and
then screw the frame onto the standpipe.
! Note: You can already insert the cable into the cable
duct in this step. The cable should run to the right
side.
! Note: The cover can also be mounted in portrait
format.
Step 1.5
Place the iPad in the holder and insert the Lightning
connector.
! Note: Make sure that the cable is in the intended
cable duct so that the iPad sits straight in the holder.
