Installation of Accessory „Scanning
Module“
Illustrations and texts are exemplary. Depending on the iPad and USB port, other power supplies or cables may be supplied.
free flex, User manual & Installation guide
page of
10
11
Step 3.1
Insert the adapter plate into the camera opening. If you
have already inserted the camera cover (see p.5, 1.1),
remove it.
Step 3.2
Mount the scanning module over the designated points
on the adapter plate.
Step 3.3
Do the further assembly steps according to items 1.2 to
1.7 (or 2.2 to 2.6 for PoE).
! Note on 1.4: The holder is turned by 180 degrees and
screwed onto the standpipe. The cable outlet leads to
the left side.
! Note on 1.4: An optimal use of the scan function is
only possible when mounting in landscape format.
This is the only way to create the scan area below the
holder.
