2 Power Supplies
Page 7 of 33
Power Supplies
WARNING
Read the General Introduction of this document to learn more on the safe use, charging, handling/shipping
and disposal of batteries
The vScan is supplied as standard with alkaline battery packs. Both the transmitter and receiver can be
supplied with optional Lithium-ion rechargeable batteries.
2.1
vScan Receiver Batteries
2.1.1
Alkaline Batteries
The vScan requires six of AA type alkaline batteries. To replace the batteries unscrew the ¼ turn fastener of
the battery compartment, open the internal battery door. Remove the battery holder and replace ALL the
batteries. Mixing good and discharged batteries may result in excessive heat or even fire.
2.1.2
Charging the Receiver Optional Li-ion Battery Pack
The battery can be charged on site. Unscrew the ¼ turn fastener of the battery compartment (do not open the
internal battery door). Align the red dot on the charger plug with the dot on the charging socket and connect
together. Connect the supplied charger to the mains and switch on. The charging LED on the charger will
illuminate red until the batteries are charged. The LED will then turn green indicating a full charge.
