Vivax CM-700TG, User Manual

Page: 48 / 64

ENG
VIVAX
11
Removing Mineral Deposits:
To keep your Coffee maker operating efficiently, remove mineral deposits left by
water. At least once a month, use a water and vinegar household cleaning
solution as described below to prevent the buildup of mineral deposits. If the
water in your area is especially high in minerals, do this every two weeks.
1. Fill the Mug with one part of white vinegar and three parts of cold water.
2. Pour the water and vinegar mixture into the Water Reservoir.
3. Place the Mug (Lid off) onto the Base.
4. Press the
START Button; the Indicator Light will illuminate.
NOTE: During cleaning, more steam occurs than when brewing coffee.
5. When the water-vinegar solution stops dripping into the Mug, allow the
Coffeemaker to cool for three minutes. Remove, rinse, and replace the Mesh
Filter and pour the water-vinegar mixture into the Water Reservoir again.
6. Press the START Button.
Allow all of the cleaning solution to drip into the Mug.
7. Discard the cleaning solution from the cup.
8. Allow the Coffeemaker to cool for three minutes, then remove, rinse, and
replace the Filter Basket.
9. Rinse the Coffeemaker by brewing a cup of cold water.
10. Allow the Coffeemaker to completely cool and clean it by washing the Mug,
the Filter Basket, and the Reusable Mesh Filter in soapy water; rinse and let
dry.
Output: 650-750W
Safety Class: I
TECHNICAL DATA
Model:
CM-700TG
Power Supply: AC 220-240V~50/60Hz
TRANSPORT AND SERVICE
CAUTION: Pay attention not to run down the device. If you run down the device
during operation, firstly unplug it. Some parts may be broken and device may be
damaged during falling, in this case, have device checked by authorized service
before operation.
WARNING: Handling and transportation. It is required to perform transportation
of device in its own original box. Plastic parts may be broken during Incorrect
packaging. Its electrical parts may be damaged.
Unplug It while It is operating for transport, maintenance or repair purposes.