Vivax CFR-146, Instruction Manual, Page: 87 / 116

VIVAX
ENG
18
Tips for Energy savings
Try not to open the door too often, especially when the weather is wet and hot. Once you
open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation
behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle setting.
Before loading the appliance with packages of fresh food, make sure they are cooled to
ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon as the
layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean free of dust or any
impurities.
◆ The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
◆ Let hot foods cool to room temperature before placing in the appliance.
◆ Overloading the appliance forces the compressor to run longer.
◆ Foods that freeze too slowly may lose quality, or spoil.
◆ Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
◆ Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
◆ Organize and label food to reduce door openings and extended searches.
◆ Remove as many items as needed at one time, and close the door as soon as
possible