Vivax BH-312EI X, Instruction Manual

Page: 158 / 176

ENG
VIVAX
22
 Gently wipe the ignition device and flame supervision device with a well
wrung-out cloth and wipe dry with a clean cloth
 Before placing the burners back on the top plate, make sure that the
injector is not blocked.
Re-assemble the Auxiliary, Semi-Rapid, Rapid and Wok burners as
follows
1. Place the flame spreader ( 4 ) on to the burner cup ( 5 ) so that the ignition
device and the flame supervision device extend through their respective
holes in the flame spreader.The flame spreader must click into place
correctly.
2. Position the burner lid (1,2,3) onto the flame speader ( 4 ) so that the
retaining pins fit into their respective recesses.
Replace parts in the correct order after cleaning:
 Do not mix up the top and bottom

The locating pins must fit exactly into the notches