Vivax BH-02T X, User Manual

Page: 120 / 152

ENG
VIVAX

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
START COOKING
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF control, all the indicators show
“-”
WARNING: Electronic components remain active for
20 seconds. If there is no cooking level within this
period, unit switches to
‘‘Off mode’’ automatically with
a signalling sound.
Place a suitable pan on the cooking zone that you
wish to use.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control.
Select a heat setting by touching the “ - “ or “ + ” control
("
U
" to "
9
").
•
If you don’t choose a heat setting within 20sec, the
ceramic hob will automatically switch off. You will
need to start again at step 1.
•
You can modify the heat setting at any time during
cooking.
•
By holding down either of these buttons, the value
will adjust up or down.