Vivax ACP-24CC70AERI2, User Manual

Page: 165 / 209

2
Handling the remote controller
Location of the remote controller.
• Use the remote controller within a distance of 8
meters from the appliance, pointing it towards the
receiver. Reception is confirmed by a beep.
CAUTIONS
• The air conditioner will not operate if curtains, doors or other materials
block the signals from the remote controller to the indoor unit.
• Prevent any liquid from falling into the remote controller. Do not expose
m
the remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to direct
sunlight, the air conditioner may not function properly. Use curtains to
• prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote controller. either move
these appliances or consult your local dealer.
Replacing batteries
The remote controller is powed by two dry batteries(R03/LR03X2) housed in the
rear part and protected by a cover.
(1) Remove the cover by pressing and sliding off.
(2) Remove the old batteries and insert the new batteries,placing the(+) and (-)
ends correctly.
(3) Reattach the cover by sliding it back into position.
(4)
NOTE: When the batteries are removed, the remote controller erases all programming.
After inserting new batteries, the remote controller must be reprogrammed.
CAUTIONS
• Do not mix old and new batteries or batteries of different types.
• Do not leave the batteries in the remote controller if they are not
going to be used for 2 or 3 months.
• Do not dispose batteries as unsorted municipal waste. Collection of such
waste separately for special treatment is necessary.