Vivax ACP-18COFM50GEI, User Manual

Page: 68 / 108

(4pc screw).
2.
3.
4.
5.
Remove the cable clamp, connect the power connection
1. Ｄ
isassemble the front side plate on the outdoor unit
front side plate.
fix the connection. The fitting line distributing must be
Wiring should meet that of indoor unit.
Fix power connection wire by wire clamp.
Ensure wire has been fixed well.
Install the front side plate.
cable with the terminal at the row of connection and
consistent with the indoor unit.terminal of line bank.
Wrong wire connection may cause malfunction of some
electric components.After fixing cable, ensure that leads
The connection pipes and the connectiong wirings of
the unit A and unit B
must be corresponding to each
An all-pole disconnection switch having a contact
separation of at least 3mm
in all pole should be
connected in fixed wiring.
between connection to fixed point have some space.
other respective.
To the power supply
To unit B
Blue
Black
YEGN
Brown
connecting
Power
Blue
YEGN
Brown
cord
Blue
Back side panel
Wiring hole of the outdoor unit
Front side panel
Black
YEGN
Brown
To unit A
connecting
Power
cord
ACP-21COFMGEI; ACP-24COFM70GEI
5
The appliance shall be installed in accordance with
national wiring regulations.
HANDLING
After having removed the packaging, check that the con-
tents are intact and complete.
The outdoor unit must always be kept upright.
Handling must be done by suitably equipped qualified
technical personnel using equipment that is suitable for
the weight of the appliance.
Do not install the outdoor unit where it is exposed
to sunlight.
INSTALLER
USER
L
N