Vivax ACP-18CF50AERI, User Manual

Page: 99 / 140

owner's manual
5
Temperature indecator
Infrared signal receiver
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Infrared signal
receiver
Timer indicator Alarm indicator Temperature
indecator
Display panel
Fig. 2-7
Display panel
Fig. 2-4
Display panel
Fig. 2-5
For fixed-frequency type, this function is used to operate the unit
temporarily in case you misplace the remote controller or its
batteries are exhausted. Two modes including
FORCED
AUTO and FORCED COOL can be selected through the
TEMPORARY BUTTON on the air-in grill control box of the
indoor unit. Once you push this button, the air conditioner will
run in such order: FORCED AUTO, FORCED COOL, OFF,
and back to FORCED AUTO.
1 FORCED AUTO
The OPERATION lamp is lit, and the air conditioner will run
under FORCED AUTO mode. The remote controller operation is
enabled to operate according to the received signal.
2 FORCED COOL
The OPERATION lamp flashes, the air conditioner will turn to
FORCED AUTO after it is enforced to cool with a wind speed of
HIGH for 30 minutes. The remote controller operation is
disabled.
3 OFF
The OPERATION lamp goes off. The air conditioner is OFF
while the remote controller operation is enabled.
NOTE
This manual does not include Remote Controller
Operations, see the<<Remote Controller Owner's
manual>> packed with the unit for details.
PRE-DEF indicator(cooling and heating
type)
Infrared signal receiver or fan only indicator(cooling only type)
Operation lamp
Temporary button
Timer indicator Alarm indicator
Temperature indecator
Display panel
Fig. 2-8
For inverter type,this switch is used for after-sales service
purpose only,the user should not push it.
3. AIR CONDITIONER OPERATIONS AND
PERFORMANCE
Use the system in the following temperature for safe and
effective operation. The Max operation temperature for
the air conditioner.(Cooling/Heating)
Table 3-1
Temperature
Mode
Outdoor
temperature
Room
temperature
Cooling operation
0°C ~ 50°C / 32 °F~122°F
-15°C ~ 50°C / 5 °F~122°F
(for the models with low
temperature cooling system)
17°C ~ 32°C
( 62 °F ~ 90°F)
Heating operation
(cooling only type without)
-15°C ~ 24°C / 5 °F~76°F 0°C ~ 30°C / 32 °F~86°F
Drying operation 0°C ~ 50°C / 32 °F~122°F
17°C ~ 32°C
( 62 °F ~ 90°F)
NOTE
1 If air conditioner is used outside the above conditions, it may
cause the unit to function abnormally.
2 The phenomenon is normal that the surface of air
conditioning may condense water when the relative larger
humidity in room, please close the door and window.
3 Optimum performance will be achieved within these
operating temperature range.
NOTE:DEF indicator(cooling and heating type)
or FAN indicator(cooling only type)
Infrared signal receiver
Display panel
Fig. 2-6
PRE-DEF indicator(cooling and heating
type)
Infrared signal receiver or fan only indicator(cooling only type)
Operation lamp