Vivax ACP-12CH35AETI-B, User Manual, Page: 189 / 248

TIMER OFF Button: Press this button to activate the Auto-off time
setting. Each press will increase the time setting in 30 minutes
increments if the setting time is lower than 10 hours. When the
setting time reaches 10h, each press will increase the time setting
1 hour in increments. To cancel the Auto-off time setting, just press
the button until the time setting is 0.0.
LED DISPLAY Button: Press this button to clear the display on
the indoor unit, press it again to light the display .
LOCK Button: Press this recessed button to lock all current
settings, and the remote controller will not accept any operation
except that of the LOCK. Use the LOCK mode when you want to
prevent settings from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock symbol will appear
on the remote controller display when the lock function is activated.
TURBO Button:
Note:
Push this button to activate the Turbo function
which enables the unit to reach the preset temperature in the
shortest tiime. When press this button on cooling mode, the unit
will blow strong cooling air with super high fan speed. When press
this button on heating mode(applicable to the unit adopts PTC
only), the PTC will be energized and bring fast heating operation.
The unit system will automatically revert back to the
previous settings after continue operating under powerful
cooling mode for about half an hour.
13
16
14
15
4
11
TIMER ON Button: Press this button to activate the Auto-on time
setting. Each press will increase the time setting in 30 minutes
increments if the setting time is lower than 10 hours. When the
setting time reaches 10h, each press will increase the time setting
1 hour in increments. To cancel the Auto-on time setting, just
press the button until the time setting is 0.0.
NOTE: While the unit is running under SLEEP mode, it would
be cancelled if any other buttons are pressed.
SLEEP Button: Press this button to activate the Energy-Saving
mode. Press again to stop the function. This function is available
on COOL, HEAT or AUTO mode only and maintain the most
comfortable temperature for you.
12