Vivax ACP-09CH25AEMI, User Manual, Page: 183 / 244

VIVAX ENG
NOTE ON LOUVER ANGLES
When using COOL or DRY mode, do not set louver at too vertical an angle for
long periods of time. This can cause water to condense on the louver blade,
which will drop on your floor or furnishings. (See Fig.A)
When using COOL or HEAT mode, setting the louver at too vertical an angle can
reduce the performance of the unit due to restricted air flow.
Do not move louver by hand. This will cause the louver to become out of sync.
If this occurs, turn off the unit and unplug it for a few seconds, then restart the
unit. This will reset the louver.
Fig. A
Caution: Do not keep louver at too vertical an angle for long periods of
time. This can cause water condensation to drip on your furnishings.
CAUTION
Do not put your fingers in or near the blower and suction side of the
unit. The high-speed fan inside the unit may cause injury.
Fig. B
Range
Deflector rod