Vivax ACP-09CH25AEMI R32, User Manual

Page: 211 / 252

VIVAX ENG
How to use the buttons
Dehumidifying operation
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1.
Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature can be set
within a range of 17
O
C~ 30
O
C in 1
O
C
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically
controlled.
Adjusting air flow direction
Use the SWING & button to adjust the desired
airflow direction.
1. Up/Down direction can be adjusted with the
button on the remote controller. Each time when
you press the button, the louver moves an angle
of 6 degree. If pressing more than 2 seconds ,the
louver will swing up and down automatically.
2. Left/Right direction can be adjusted with the
button on the remote controller. Each time when
you press the button, the louver moves an angle
of 6 degree. If pressing more than 2 seconds, the
louver will swing up and down automatically.
NOTE: When the louver swing or move to a position which would affect the cooling or heating
effect of the air conditioner, it would automatically change the swing/moving direction.