Vivax ACP-09CH25AEFI, User Manual, Page: 185 / 220

TEMP Button :
Push this button to decrease the indoor
temperature setting.
RESET Button:
When you press the recessed RESET button,
all current settings are cancelled and the control will return to
the initial settings.
SLEEP Button:
Press this button to go into the Energy-Saving
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
2
1
6
ON/OFF Button:
Push this button to start operation, push the
button again to stop operation.
9
TEMP Button :
Push this button to increase the indoor
temperature setting .
2
AIR DIRECTION Button:
Press this button to change the swing
angle of the louver. The swing angle of the louver is 6 for
each press. When the louver swing at a certain angle which
would affect the cooling and heating effect of the air conditioner,
it would automatically change the swing direction . No symbol
will appear in the display area when press this button. (Not
applicable to units without this function).
o
MODE Selection Button:
Each time the button is pressed, the
operation mode is shifted in the direction of the arrow:
AUTO COOL DRY HEAT FAN
3
FAN SPEED Button:
Used to select the Fan Speed in four steps-
AUTO LOW MED or HIGH. Each time the button is pressed,
the fan speed mode is shifted.
、 、
8
TIMER ON Button:
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on time
to 0.0.
10
11
4
5
1
Model
Transmission Distance
Rated Voltage
R51M/(C)E, R51M/BG(C)E, RG51M2/(C)E,
RG51A/(C)E, RG51M3/(C)E, RG51M3/BG(C)E,
RG51M8/(C)E,RG51M9/(C)E, RG51M/BGE-IN
-5 C 60 C
。 。
8m
3.0V(Dry batteries Lr03 2)
×
Remote Controller Specification
Performance Features
Features of the Remote controller buttons
1. Operating Mode: AUTO COOL DRY HEATand FAN .
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C.
4. Full function of LCD (Liquid Crystal Display)
、 、 、
。 。
Fig. 1
( C)
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON SLEEP
ON/OFF
TIMER OFF
AIR
DIRECTION
RESET LOCK
1
2
4
5
6
7
3
8
9
10
11
12
13
14
Environment
SET TEMPERATURE
SWING
LED
DISPLAY TURBO
SWING Button:
Push this switch button to activate auto
swing feature of the horizontal louver. Push it again to stop.
LED DISPLAY Button:
Press this button to clear the digit
display in the air conditioner, press it again to activate it (Not
available for the units without LED display window).
7
*
*
*
*
* *
*
*
NOT E:
: Indicates optional
button.
M odels RG51M2/(C)E.
Models RG51M3/(C)E
and RG51M3/BG(C)E.
Models of
R51M/(C)E, R51M/BGE,
R51M/BGE-IN.
4 ,6 ,7 ,14 ,15 buttons
are not available for
Models RG51M9/(C)E.
14 and 15 buttons
are not available for
7 , 14 and 15
buttons are not available
for
15 button is not
available for
6 ,7 ,14 ,15 buttons
are not available for
Models RG51M8/(C)E.
CLEAN
AIR
15
*
*
*
*
* * * * *
* * * *
NOTE
： Please do not select HEAT mode if the machine
you purchased is cooling only type. Heat mode is not
supported by the cooling only appliance.
PDF created with pdfFactory Pro trial version www.pdffactory.com