Vivax 32LE94T2, Instruction Manuals

Page: 225 / 268

VIVAX
ENG
22
Using the Remote Control
• Turning your TV on and off
Turning off to standby mode: Long press (>4s) [ ( | )
Power Standby
] button
on the bottom of the TV cabinet or press on the remote control POWER
button. You can activate the unit again by pressing [ ( I ) Power Standby].
Power indicator: Light indicates standby mode. There will be no light when
the power switch is in the off position.
► NOTE
Remove the connection from the wall power outlet if you do not intend to use the unit for
long periods, for example if you plan to be away a few days. Wait at least 5 seconds after
turning off if you want to re-start the TV.
• Selecting the Input Source
Select the Input Source depending on the video device you have connected
to your TV.
To select the Input Source: Press [
Source
] button. When the list of Input
Source appears, press [▲/▼] to select the source, then Press [
OK
] to
connect.
• Adjusting the volume
Press [
VOL+/VOL-
] to increase or decrease the volume.
Press [
Mute
] to turn the sound off. Press [
Mute
] again to turn the sound
back on.
• Changing channels
Press the [
CH +/CH
-] buttons to go to the next higher or lower channel. Or,
Press the number buttons to select a channel. For example, to select channel
12, press [1], then press [2].
• Selecting the picture mode
Press the [
SMART
] button to select between different pre-adjusted picture
modes: Standard, Cinema Day,Cinema Night, PC Game, Dynamic and
Personal.
• Displaying Channel List
Press [
List
] to display the full list of digital and analogue channels available.
• Electronic Programming Guide (GUIDE)
Provides convenient access to the
television programs that will be available
in the next 7 days. The information
displayed by the EPG is made available by the commercial television
networks for digital channels only. The EPG also provides a simple way to
program the recording of your favorite programs. There is no need to setup
complicated timers.