P/N: 4.04.000073
page 2 of 10
1.1.2
Pushbuttons
1
On/Off
2
Frequency Select
3
Output Increase/Navigate through menu
4
Output Decrease/Navigate through menu
5
Information (Volume, Volts, Ohms, LCD
Contrast, Multi Frequencies, Frequency Menu)
1.1.3
Information Pushbutton
When the “i” (information) pushbutton is pressed, the display will show the audio volume level , use the “+” and
“-” pushbuttons to increase/reduce the volume or turn the beeper off (off – low – medium – high).
By pressing the
“i” (information) pushbutton the display can be toggled to show “voltage” and “resistance”. The
display indicates mA, as the default, and volts or ohms when selected.
1.2
Transmitter Battery
By default, transmitters are shipped with eight D cell alkaline batteries. A rechargeable Li-Ion (Lithium-Ion)
battery kit is available as an accessory. The battery status is displayed on the left side of the display.
The letters
“LP” will appear when the battery status reaches only one bar. At this battery level the max output
current and power is limited.
1.2.1
Removing the Battery Tray
