VCI10-BH
BLUETOOTH
®
HART
®
COMMUNICATION INTERFACE INSTALATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
17
Figure 8.2
– Pairing VCI10-BH.
Figure 8.3
– Installed devices.
A serial port was created during the pairing process. In order to check the serial port number, right-
click the paired device and select
Properties
. Click on
“Hardware” tab. The serial port number appears on
Standard serial over Bluetooth link
. This number must be used on FDT/DTM tool or any other tool that
uses serial communication.
Figure 8.4
–Serial port for Bluetooth.
Once the interface is paired, this procedure will not be necessary again.