VCI10-BH
BLUETOOTH
®
HART
®
COMMUNICATION INTERFACE INSTALATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
16
8
FDT/DTM TOOLS
VCI10-BH works with any HART
®
tool on Windows® plattform that uses serial communication port,
being used with several FDT/DTM tools.
The main steps to configure and communicate to VCI10-BH on Windows
®
are described below.
Before initializing the procedure, check if the computer is enabled with Bluetooth device. If not, user must
install a Bluetooth adapter (
In this option you must use the password "1234" for the pairing).
.
The first step is to find the Bluetooth connection for VCI10-BH and execute pairing. Enter
Control
Panel
on Windows
®
and open the option
Devices and Printers
. Right-button the screen and select
Add
devices and printers
.
Figure 8.1
– Adding a new Bluetooth device.
The
Bluetooth identification for VCI10-BH is composed by
“BH-” + Interface Code. This code is
located on the back side of the batteries cover.
After interface is found on device list, select it and click to proceed. A random key will be shown on
screen.
Click Yes. After this step, the interface will be paired and will appear on device list.