User Manual – Tactum 4NTR – june 2011
VITY Technology
www.vity.com
7
B.
Use
After carefully unpack the TACTUM 4NTR remote control and checked all accessories showed on the first
page of the manual are present:
1 – Connect the flexible and flat LAN cable to the Ethernet network RJ45 LAN plug at the back of the remote
control.
2 – Connect the green power plug to the 12V DC1A port at the back of the remote control. Then, connect the
supply to a 100-240V AC plug.
3 – Open the frontal trap door and push the right blue button “On / Off”, the button get illuminated and Vity’s
logo appears for few seconds during the program loading period.
A. It is advice to keep the remote control under tension for a frequently use, it will start the standby
mode to save energy, and be activated again when someone will get closer of the remote control.
B. If you want to turn it off, just push the « On / Off » button and it will stop.
4 – The program icons appear on the screen, a simple touch with the finger will activate the action related to
the icon.
5 – The four buttons at the right of the screen are intended for special applications when they are created in
the program.
Note: The program appearing on the screen is designed and installed by your supplier and it is
appropriated to your application.
