User Manual – Tactum 4NTR – june 2011
VITY Technology
www.vity.com
10
KNX plug :
KNX connection port allowing communication with all electric devices using KNX norm
(configuration is done by the installer and is not explained in this manual).
NOTE : Be careful to respect polarity – and + (they are print under the plug)
Others
WIFI:
The TACTUM 4NTR remote control can communicate through WiFi 802.11b/g. (Configuration is done by
the installer and is not explained in this manual).
In case of problem:
If the TACTUM 4NTR remote control doesn’t work, before calling the technical service, check the On/Off
button behind the front trap door, it should be turn on and check that all the cables are connected and locked.
D.
Specifications
LCD screen
TFT Colored 4,3'' (10,9 Cm)
Type : WQVGA (480X272)
Format : 16/9
Brightness : 500cd/m²
Colors : 262,144 (18-bit)
Touch panel
Multipoint Capacitive
Memory
Internal: 128 Mo SDRAM
Storage : MiniSD : 1Go
Inputs/Outputs
1 X10/100 Mbps Ethernet PoE (RJ45)
1 X RS-232/422/485 (RJ11)
1 X KNX Port (2,5 Type Phoenix)
1 X Infrared Port (Mini Jack 3,5 mm)
1 X Slot (Internal) memory card MiniSD
1 X USB 1.1 Port
1 X infrared receiver
1X Light detector
1X Motion detector
1X Temperature sensor
4 X Blue backlight Push buttons
1 X ON/OFF button
WI-FI
802.11 b/g
Camera
3M pixel CMOS YUV
Audio
2 X 1,5W speakers
1 X Microphone
