Vitus Audio RI-100, Owner'S Manual

Page: 38 / 48

38 RI-100 | v 06.09.2011
7. appendix
Example 9
Changing the offset-
gain of the inputs.
You can set different offset-
values for the different inputs.
You actually adjust the gain
of one individual input. This
will reduce the differences
in volume, when you switch
from one input to another. The
offset-value can be set from
-12 dB to +12 dB.
You can not change the offset
gain when you selected FIX
ON.
The following example
illustrates how to change the
offset-values: The signal on
the source using line 2 is 3 dB
higher than the signal on the
source using line 1.
We will reduce the differences
in volume between input 1
and input 2 by lowering the
offset gain of line 2 with 3 dB.
Figure 7.
RI-100 Left front panel.
Figure 19 Example 9 Changing the offset-gain of inputs
Figure 12 Example 6 RP-101
LEAVE
OUTPUT
SETUP
BACK
DATA
RESET
REMOTE
V.INIT
BRIGHT
INPUTS
BACK
INPUT
BACK
USED
TEXT
OFFSET
O.O
- .O
- .O
- .O
OFFSET
SELECT
SELECT
SELECT
SELECT
SELECT
3
2
MENU
Press the“MENU”button to
enter Menu Mode.
Navigate to the INPUT sub-
menu, using the function buttons
on the left front
1.

Scroll forward in the
menu.
2. MENU/ Enter & Exit
SELECT submenus and
selectsettings.
3.  Scroll backward in
the menu.
The amplifier now automatically
turns the volume up or down
when you change between
inputs.