Vitto Fingerprint Series, User Manual, Page: 8 / 9


Card Reading

FP reader able to set either of 4 types of access mode. They are Card only
；
Card + FP
；
FP
only ； Card or FP.

Card Only: Present card to get card data > output card data to controller

Card + FP
：
Present card to get card data > compare the card data and the data which
store inside the FP reader and find out the corresponding user ID > scan FP and
compare the corresponding FP template > If success, output card data to controller

FP only
：
FP scanner will always get ready to scan. Scan FP and compare all FP
template which store inside device > If success, get the corresponding user ID and
data > output card data to controller

Card or FP
：
Please refer to “Card Only” and “FP Only”
Card only Read card success
Orange LED light up
，
buzzer
long beep once
（
100ms
）；
Blue
backlit light up for 5s.
Output card data
FP only Waiting for FP scanning No LED light up normally. When
user put finger on the scanner,
FP Scanner blue LED light up
Compare FP success
Orange LED light up
，
buzzer
long beep once
（
100ms
）；
Blue
backlit light up for 5s.
Output card data
Compare FP fail Buzzer short beep twice
（ 50ms/time ）
Card or FP Waiting for FP scanning No LED light up normally. When
user put finger on the scanner,
FP Scanner blue LED light up
Read card success or Compare FP
success
Orange LED light up
，
buzzer
long beep once
（
100ms
）；
Blue
backlit light up for 5s
。
Output card data
Compare FP fail Buzzer short beep twice