Vitto Fingerprint Series, User Manual, Page: 3 / 9

Model
Functions
Standard Fingerprint Reader Keypad Fingerprint Reader
Configurable Functions
Re-configure Window
5 seconds (Default) or Half an hour after Power up
Reader Output Format
CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID
Wiegand Pulse Width
Different choices to fit with different Controller’s requirements
Keypad Output
N/A Definable
Buzzer Control
Reader & Controller control (Default) or Controller control only
LED/Back lit Control
Define different LED color response base on Green LED cable input
Technical Specifications
Typical Read range
3 – 5 cm
Reader Standard Output
Wiegand (RS232 & RS485 optional)
Standard Keypad output
N/A Wiegand with 4 bits burst
Wiring Distance
150m (22 AWG with shielded cable)
Fingerprint Scanner
Optical
Fingerprint Capacity
4,000 templates
，
each user can enroll 2 fingerprints (Network Version)
Based on the card capacity (Standalone Version)
Template Size
193 Bytes
Fingerprint Parameter
Verification Time: 1 s / 1000 fingerprints stored
，
FRR
≤
0.001%
，
FAR
≤
1%
Access Mode
Network and Standalone Version: Card Only
，
Finge Card
Network Version Only: Fingerprint or Card
，
Fingerprint Only
Template
Synchronization
Use software to upload and download via RS485 (Network Version)
Templates store inside card (Standalone Version)
Operating Specification:
Operating Voltage
10 - 15VDC
Operating Current
250mA (max)
Operating Temperature
-20
℃
-60
℃
Exterior dimension
186 L * 85 W * 22 H (RFID Reader) / 31.5 H (Fingerprint Scanner) mm
Case material
PC+ABS
Standard Color
Black and White
Operating Humidity
20% - 85%
Weight
330g