8
2. POSITIONING THE GLASS DECOR PANEL
in order to refit the glass panel correctly, ensure that the four plastic tabs on the
panel are in perfect alignment with the anchor holes. When the glass panel tabs
are aligned with the holes, press the four corners of the glass panel evenly until it
is fully inserted into the wall-mounting box.
After fitting the glass panel, the buttons remain inoperative for about 10 seconds.
An acoustic signal sounds three times to indicate that the sensors have been re-
calibrated, after which they resume normal operation. to remove the glass panel
from the wall-mounting box, gently lever the upper or lower edge away.
Anchor holes on electronic section
Anchor tabs on décor panel
