12
4. CONFIGURATION OF THE TYPE OF SWITCH
Vitrum is configured to operate as a normal on/oFF switch (i.e. to ‘toggle’ the
on and oFF status with each touch). the individual channels can be configured
as simple buttons. to do so, proceed as follows:
Remove the glass décor panel.
•
Press and hold down the
•
two
service touch keys for at least 8 seconds and
wait until the BEEP sounds twice to indicate that the system has entered the
configuration
MENU
. the lEDs in the touch keys will begin to flash either
blue or red, depending on the setting entered. the default setting for the
flashing light is blue since the factory setting is Switch.
