EN
15
the refrigerator.
7
Installation and Use
7.1 Checking the packaging
As soon as the package arrives, inspect it, making sure that it is not upturned
and that it has suffered no damage during transport. Remove the packaging
and inspect the unit for damage of any kind. If there is any doubt as to the
integrity of the system parts, do not use the refrigerator. You must inform
your dealer of any damage and/or anomalies not later than 24 hours from
the date of purchase.
7.2
Positioning
The overall dimensions (in millimetres and inches) of the FG10I VFAU
refrigerators are shown in the next figures.
FG10I VFAU
Place the refrigerator on a horizontal surface and use the adjustable feet to
level it, if needed. When choosing the position of the refrigerator, remember
that a gap of at least 50 mm (2 in.) is required between the back panel of the
refrigerator and any wall in order to allow the warm air from condensation
to escape. We recommend leaving a gap of the same size 50 mm (2 in.)
between the top part of the refrigerator and any surface above it. As far as
any space requirements at the sides of the refrigerator are concerned, there
are no specific instructions.
