VITO REDEYE VIMDAVL60, Instruction Manual

Page: 23 / 40

EN
23
2. GENERAL USE &
SAFETY WARNINGS
While using this device, several
basic safety precautions must
always be followed in order to reduce
the risk of fire, electric shocks and
personal injuries.
Read and understand the
manual before start using this
equipment. Save this manual for
future reference.
2.1 - GENERAL
Always use the device with care
in a responsible manner having in
consideration that its user is responsible
for eventual accidents caused to third
parties or their goods.
Make sure that all individuals using this
tool have had the necessary training
and have read and fully understand
these operating instructions. Before
operating it for the first time, its user
must be instructed by the vendor
or a competent person about its
functionalities.
Never allow this machine to be used by
children, people with limited physical,
sensorial or mental capabilities, with
lack of experience and knowledge of
this equipment and who is not familiar
with the instructions.
Use this equipment only if you are in
good physical and mental conditions.
Do not use it if you are tired or under
the influence of alcohol, drugs or
medication. If you suffer from any
health problem, please ask your doctor
about the possibility of using the tool.
Never direct the laser ray towards
persons or animals and do
not look straight at the ray. This device
produces class 2 laser rays, according
to IEC 60825-1. A long exposure to the
laser rays might cause blindness.
This device has a warning sticker.
Before the first utilization, make sure
the sticker is glued on and never use
the device if the warning sign is not
legible.
Wearing laser protective glasses
reduces the risk of eye injuries. Make
sure the glasses characteristics match
the type of laser ray.
This device must only be
operated as described in this
instruction manual. No other use is
allowed besides the described, or it might
cause injuries due to laser ray exposure.
For safety reasons, any changes other
than the assembly of accessories
authorized by the manufacturer are
prohibited. Any changes made void the
warranty.
You can obtain any information about
the authorized accessories through
your VITO official distributor.
Do not expose this device to rain or use
it in wet or damp environments. The
presence of water in an electric tool
increases the risk of damage.
Do not expose the laser to direct sun
light, excessively high temperatures
and temperature fluctuation. In case
of using the device under these
conditions, the accuracy may not be
precise.
Do not use the lasers in an
explosive environment, especially
in the presence of flammable liquids,
gases or dusts. Any power tool may form
sparks that might ignite liquids, gases, or
dust.
2.2 - MAINTENANCE
AND CLEANING
Cleaning:
Always keep the device clean and dry,
free from oil, lubricants and grease.
Clean every component and accessory
after using the device.
Do not use aggressive cleaning
products. These products may damage
plastics and metals, compromising the
safe operation of the machine.
Maintenance:
Only maintenance works described in
this instruction manual may be carried
out; all other works must be performed
by an official distributor.
Keep all the nuts and screws well
tightened in order to ensure a safe
operation.
2.3 - TECHNICAL ASSISTANCE
This device must be repaired only by
the brand official technical service or
by qualified technicians and only with
original replacement parts.
3. ASSEMBLY
INSTRUCTIONS
3.1 - BATTERIES PLACEMENT/
REPLACEMENT
When selecting and using batteries,
some aspects must be considered:
� Use alkaline batteries (2 x 1.5V LR03
AAA or 2 x 1.2V HR03 AAA);
� Use batteries from the same fabricant,
type and capacity;
� Replace the batteries at the same
time. Do not mix old/discharged
batteries with new/charged batteries;
� If the device will not be used for a long
period of time, remove the batteries.
These might rust or discharge during
storing period;
� The discharged or worn out batteries
must be eliminated according to local
rules and laws;
Use the following procedure to place/
replace batteries: