16
EN
ADDITIONAL SAFETY
INSTRUCTIONS FOR MULTI-
PURPOSE
TABLE SAW
WARNING: Be sure to read and
understand all instructions.
Failure to follow all insturctions
listed below may result in electric
shock, fire and / or serious personal
injury.
1. Know your power tool. Read
operator’s manual carefully. Learn
the applications and limitations,
as well as the specific potential
hazards related to this tool.
2. Always wear safety glasses or
eyes shields when using this
mitre saw. Everyday eyeglasses
have only impact-resistant lenses;
they are not safety glasses.
3. Always protect your lungs. Wear
a face mask or dust mask if the
operation is dusty.
4. Always protect your hearing.
Wear hearing protection during
extended periods of operation.
5.Inspect the machines power cord
regularly and if damaged have it
repaired of replaced. Always be
aware of the cords location.
6. Always check for damaged parts.
Before further use of the power
tool, a guard of other part that
is damaged should be carefully
checked to determine if it will
operate properly and perform its
intended function. Check for
misalignment or binding of moving
parts, breakage of parts, and any
other condition that may affect the
power tool’s operation. A guard or
other part that is damaged should
be properly repaired or replaced
at a qualified service centre. Keep
guards in place and in working
order.
7. Do not abuse the cord. Never
use the cord to carry the tool or pull
the plug from the outlet. Keep cord
away from heart, oil, sharp edges
or moving parts. Replace damaged
cords immediately. Damaged cords
increase the risk or electric shock.
8. Always make sure that your
extension cord is in good condition.
When using an extension cord be
sure to use one that is heavy
enough to carry the current that
your power tool will draw. An
undersized cord will cause a drop
in line voltage, resulting in loss of
power and overheating.
9. Do not use the power tool while
tired or under the influence of
drugs, alcohol or any medication.
Following this rule will reduce the
risk of electric shock, fire or serious
personal injury.
10. Save these instructions. Refer
to them frequently and use them
to instruct others who may use this
tool. If someone borrows this power
tool, make sure they have these
instructions also.
11. When the correct blade to cut the
material has been fitted, this saw is
recommended for cutting wood and
plastic only.
12. Do not use saw blades with
Hight Speed(HSS) or blades that
are damaged or deformed.
13. Replace the table insert when
worn.
14. Use only saw blades
recommended by the manufacturer
and which are the exact bore and
diameter required for this machine.
15. Wear dust protection when
sawing material likely to cause dust.
16. Check the maximum depth of
cut.
17. Select saw blades in relation to
the material to be cut .
18. When sawing long work pieces,
always use extra support to provide
better support, and use clamps or
other clamping devices.
19. Make sure the operator is
adequately trained in the use,
adjustment and operation of the
machine.
20. Provide for adequate room
lighting at your workplace of for
adequate lighting of the immediate
work area.
21. Refrain from removing any cut-
offs or other parts of the workpiece
from the cutting area whilst the
machine is running and the saw
head is not in the rest position.
Never reach around the saw blade.
Turn off tool and wait for saw blade
to stop before moving workpiece or
changing settings.
22. Never stand on this tool.
Serious injuries could occur if this
power tool tips over and you come
into contact with the saw blade.
23. Reduce the risk of unintentional
starting. Make sure switch is in
off position before plugging in.
WARNING: The operation of any
table saw can result in foreign
objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power
tool operation, always wear safety
goggles or safety glasses with side
shield and a full face shield when
needed.
WARNING: If any parts are missing,
do not operate your table mitre saw
until the missing parts are replaced.
Failure to follow this rule could
result in serious personal injury.
ADDITIONAL SAFETY ADVICE
CARRYING YOUR TABLE SAW
Safety Advice
1. Although compact , this saw is
heavy. To reduce the risk of back
injury, get competent help whenever
you have to lift the saw.
2. To reduce the risk of back injury,
hold the tool close to your body
when lifting.
Bending your knees so you can lift
with your legs, not your back. Lift
by using the handhold areas at each
side of the machines base.
3. Never carry the table saw by
the power cord. Carrying the tool
by the power cord could cause
damage to the insulation or the wire
connections resulting in electric
shock of fire.
4. Before moving the saw tighten
the mitre and bevel locking screws
to guard against sudden unexpected
movement.
5. Lock the cutting head in its
lowest position. Ensure that
the cutting head locking pin is
completely engaged in its socket.
