VITO PRO-POWER VIBE1050A, Instruction Manual

Page: 29 / 47

29
▪
The backlash occurs due to an incorrect use of the
power tool or due to a not proper working procedure
which can cause serious injuries to the user. To avoid
the backlash, the following precautions must be
considered:
- Always use the auxiliary handle to have as much
control as possible over the backlash forces or
reaction torques while operating the equipment;
- Place and keep the rotating accessory in the right
position and well tightened;
- Do not place yourself in the area where the power
tool will move in case of a backlash;
▪
Never place your hands near the rotating accessory
once it may revert over them. Keep your hands away
from the rotating accessories;
▪
When the rotating accessory gets stuck, switch off
the power tool. In case of losing control, unplug the
power cord immediately;
▪
To avoid displacements or projections use a fixing
tool or a bench vice to ensure a safe performance.
Place/maintain the object in a correct and stable
position;
▪
Never leave the equipment before the rotating
accessory is completely stopped. The rotating
accessory may touch the surface, making you lose the
control over the machine;
▪
Make sure that the ventilation grids are not blocked
while operating the machine. Do not place any
objects over the grids;
▪
The drills chucks and the power tool itself may get
hot during the work. Any accidental contact may
burn;
▪
Make sure that you don’t damage the electrical
circuits, gas and water pipes when operating the
equipment. Any of these damages may cause fires,
explosions, electrical shocks or several expensive
losses;
▪
Avoid using the machine on surfaces coated with
paints containing lead or other materials harmful to
health. Any contact or inhalation of dust may cause
allergic reactions and / or breathing diseases. Wear a
mask and work with a dust extraction device if the
machine allows it;
▪
Materials containing asbestos cannot be worked.
Asbestos is carcinogenic.
Maintenance and cleaning
Before performing cleaning, adjusting, repairing and
maintenance works, the power cord must be
unplugged.
Replace worn out or damaged parts immediately, so
that the machine is always in a safe operating condition.
Cleaning:
The power tool must be carefully cleaned after each
use.
Do not use aggressive cleaning products. These
products
may damage plastics and metals,
compromising the safe operation of the machine.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official dealer.
Keep all nuts and screws well tightened in order to
ensure a safe operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned
immediately.
Use only VITO-approved tools for this machine or
technically identical parts. Not doing so may result in
personal injuries or damages to the machine. In case of
doubt, you should contact an official dealer.
Technical assistance
Your impact drill with hammer mode should only be
serviced by the manufacturer's internal service
personnel, or other qualified personnel, replacing any
necessary parts with original parts sourced directly from
the manufacturer.