Vito Agro VIME7, Instruction Manual

Page: 44 / 72

44
Front wheel
1. Remove the wheel’s fixing screw and the fixing pin;
2. Place the wheel on the frontal wheel holder (1);
3. Place the fixing screw and the adjustment pin on the
upper wheel holes and on the holder holes;
4. Place the respective beta keys;
When performing:
1. Remove the pin and pull the wheel up.
2. Place the pin into the lower wheel hole wheel and
into the holder hole (1);
3. Place the beta key;
Assembling the speed lever on the handlebar
1. Fasten the lever on the handlebar column (36)
through the fixing pin before assembly the column;
2. Put the pin from top to bottom and the respective
beta key;
3. Place the lever on the gearbox shaft using the fixing
pin.
Handlebar column assembly
1. Place the handlebar column (36) on the top of the
gearbox (33).
2. Place and fasten the four fixing screws on the
gearbox;
3. Place and fasten the column fixing screw on the
pulley holder;
4. Place the cables fixing clamp (34);
Speed lever attachment on the gearbox shaft
1. Release the fixing screw and remove the pulley;
2. Engage the speed lever to the gearbox shaft with the
fixing pin;
3. Place the beta key;
Fixing screw
Adjustment pin
Adjustment pin
Cables fixing clamp
Fixing screws
Gearbox lever
fixation point
Fixing pin and
beta key
Pin and beta key on
the gearbox shaft
Pulley screw