General Safety Instructions
•
Read the operating instructions carefully before using the Table Blender for the first
time.
•
This Table Blender is designed for personal use and is not suitable for commercial
use.
•
Do not use outdoors. Keep away from direct sunlight, heat sources and do not use
with wet hands.
•
Before cleaning ensure the Table is switched off and the plug removed from the
socket.
Warning
•
Before using, please ensure that your output voltage is the same voltage as stated
on the rating label of the Table Blender.
•
Before use please check the power cord and accessories of the Table Blender, do
not use if there is any damage.
•
Ensure the power cord is not hanging over any sharp edges or overhanging the
worktop.
•
Do not plug in or use the Table Blender with wet hands.
•
Do not use the Table Blender on a tablecloth or near curtains to avoid the risk of
burning.
•
When in use do not use an external power cord connection.
•
Failure to follow these instructions can result in damage to the appliance and harm
to the user. No liability is accepted if these instructions are not followed or if
damage results through improper use. Any attempt to alter the appliance or not
follow instructions may result in harm and will also void any warranty.
•
The Table Blender should be placed on a stable surface when in use.
•
Do not place anything on the top of the Table Blender.
•
Do not use the Table Blender for anything other than that specified in the operating
instructions.
•
Do not leave the Table Blender unattended when in use.
•
After using the Table Blender, press the power button to turn off, and then remove
the plug from the socket.
•
This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
Summary of Contents for TB-6010A
Page 2: ......
