- After striking a foreign object to inspect the machine for damage;
- Whenever the machine starts vibrating abnormally, for immediately check.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
j) Take care against injury from any device fitted for trimming the filament line
length. After extending new cutting line always return the machine to its normal
operating position before switching on.
k) Never fit metal cutting elements.
l) Warning! Cutting elements continue to rotate after the motor is switched off. Do
not touch!
m) Do not overreach and keep your balance at all times, always be sure of your
footing on slopes and walk, never run with the machine.
n) Use only extension cables authorized for outside work and protect from water.
The extension cable must have conductors of at least 1,5 mm2 for a cable length
less than 25 m and 2,5 mm2 if the length exceeds 25 m. before use, always
completely unroll the cable to check that the cable is in good condition.
o) Never replace the non-metallic cutting means with metallic cutting means.
p) In case of accident or breakdown immediately stop the machine.
q) Do not touch moving hazardous parts before the battery is removed.
r) Do not connect a damaged cord to the supply or touch a damaged cord before it
is disconnected from the supply for the reason that damaged cords can lead to
contact with live parts.
s) Keep extension cords away from moving hazardous parts to avoid damages to
the cords which can lead to contact with live parts.
t) In case of abnormal vibrations, switch the machine off immediately, and check it
for damages, if necessary, have it repaired by a qualified person. It is recommended
to wear protective gloves, and to take breaks at regular intervals.
u) Never use replacement parts or accessories not provided or recommended by
the manufacturer.
5
Summary of Contents for JK08014101
Page 21: ...Trouble Shooting 20...
