www.vitessehome.com
P/13
P/14
the countdown.
7. At the end of the cooking process you will hear a beep and the Multi Cooker
automatically switches to Keep Warm: ROAST indicator goes out, and Keep
Warm starts flashing. Click on the keep warm / CANCEL to turn off the heater
and open the lid. Despite the fact that the regime is willing to maintain the
temperature of food for 8 hours or more, do not leave food in this mode for a
long time, it can lead to drying of the product.
8. Disconnect the unit from the mains.
PROGRAM "DESERT"
1. Put the necessary ingredients and spices in a bowl, cover with water. Make
sure that all the ingredients (including liquid) were below the MAX, is located
inside the bowl.
2. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
3. Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
4. Connect the device to the mains.
5. Press “Select Program” button and choose the DESERT Function. Automatic
cooking time: 30 Mins. You can change it by adjusting the cooking time.
6. Press the START button to begin the process of heating, the display will show
the countdown.
7. At the end of the cooking process you will hear a beep and the Multi Cooker
automatically switches to Keep Warm: DESERT indicator goes out, and Keep
Warm starts flashing. Click on the keep warm / CANCEL to turn off the heater
and open the lid. Despite the fact that the regime is willing to maintain the
temperature of food for 8 hours or more, do not leave food in this mode for a
long time, it can lead to drying of the product.
8. Disconnect the unit from the mains.
PROGRAM "PASTA"
1. Place 2 1/2 cups of warm water and 1 tbsp. of olive oil in the cooker. Oil is a
necessity when cooking pasta or it will stick together. Feel free to use any kind
of oil you like; a pat of butter will do fine as well.
2. Put one cup of pasta in the cooker. If using spaghetti or other long noodles,
you will need to break the noodles in half so they'll fit.
3. Stir the pasta and warm water, and turn then Press “Select Program” button
and choose the Pasta Function. Automatic cooking time: 15 Mins. You can
change it by adjusting the cooking time (1 Minutes to 99 Minutes).
4. Press the START button to begin the process of heating, the display will flash
the characters: ----Warm-up time is set by the microprocessor, the process will
end automatically, but you can stop it by pressing keep warm / CANCEL.
5. Check the water level after the cooking cycle is complete. If necessary, add
more water, and start the cooking cycle again.
6. When the pasta has finished cooking, drain and serve it.
PROGRAM "VEGETABLES"
1. Put the necessary ingredients and spices in a bowl, cover with water. Make
sure that all the ingredients (including liquid) were below the MAX, is located
inside the bowl.
2. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
3. Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
4. Connect the device to the mains.
5. Press “Select Program” button and choose the VEGETABLES. Automatic
cooking time: 3 Mins. You can change it by adjusting the cooking time.
6. Press the START button to begin the process of heating, the display will show
the countdown.
7. At the end of the cooking process you will hear a beep and the Multi Cooker
automatically switches to Keep Warm: ROAST indicator goes out, and Keep
Warm starts flashing, the display will show the countdown. Click on the keep
warm / CANCEL to turn off the heater and open the lid. Despite the fact that the
regime is willing to maintain the temperature of food for 8 hours or more, do
not leave food in this mode for a long time, it can lead to drying of the product.
8. Disconnect the unit from the mains/
PROGRAM "CAKE"
1. Prepare the dough for as recommended by your chosen recipe.
2. Grease the bowl with butter or margarine so that the baked product is easier to
take out of the bowl. Put the dough in a bowl and line it.
3. Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4. Close the cover until it clicks. If the lid is not closed properly, the program will