![Vitek Winx Club WX 4001 MS Manual Instruction Download Page 7](http://html1.mh-extra.com/html/vitek/winx-club-wx-4001-ms/winx-club-wx-4001-ms_manual-instruction_1036292007.webp)
ENGLISH
7
2. To repeat all tracks press the
REP/RAN
but-
ton twice, all tracks will be constantly repeat-
ed.
3. To repeat one folder press the
REP/RAN
but-
ton thrice, all tracks in the folder will be con-
stantly repeated.
Note: These functions are active only in the
playback or pause mode.
Random playback
1. To random playback all tracks on the disc,
press the
REP/RAN
button four times in the
playback mode, “RANDOM” will appear on
the LCD-display.
2. To cancel random playback of all tracks, press
the
REP/RAN
button once again,
“RANDOM”
will disappear from the LCD-display.
Note: These functions are active only in the
playback or pause mode.
PROGRAMMING THE PLAYBACK
You can program playback of tracks in the de-
sired order.
1. Switch on the unit. Set the
FUNCTION
switch
to the AUX(MP3) position.
2. Press and hold the
PLAY/PAUSE/USB
but-
ton on the unit to move to the USB playback
mode.
3. In the stop mode, press the
PROG
button
once. “PROGRAM”, track number “P01” will
appear on the LCD-display.
4. Select the desired track, consequently press-
ing the
or
buttons.
5. To move 10 tracks forward or backward press
and hold the
-10/FOL-
and
+10/FOL+
but-
tons (to select album press and hold the but-
tons).
6. To store the selected track press the
PROG
button. The number of the track will change
to “Р02”.
7. Repeat points 3-6 to program each of the
following tracks. You can program up to 99
tracks
8. To playback programmed tracks, press the
PLAY/PAUSE
button.
Note:
To pause programmed playback press the
STOP button.
To resume programmed playback press the
PLAY/PAUSE button.
To cancel program mode press the STOP
button or open the disc slot lid, eject the
USB-device from the corresponding jack, or
set the FUNCTION switch (4) to another po-
sition.
Note: Maximal number of tracks in a folder:
999. Maximal number of folders: 255.
Note: This unit does not support playback
from HDD discs and some MP3 players.
CASSETTE PLAYBACK
1. Set the
FUNCTION
(4) switch to the
TAPE(OFF) position.
2. Press the STOP / EJECT button to open the
cassette receiver lid. Insert a cassette with
the records and close the lid.
3. Press the PLAY button to start playback of the
cassette.
4. Press the STOP / EJECT button to stop play-
back.
Pause the playback
Press the PAUSE button
To resume playback press the PAUSE button
once again.
RECORDING ON THE CASSETTE FROM RA-
DIO
1. Set the
FUNCTION
(4) switch to the RADIO
position.
2. Perform steps 2 and 3, from the “Radio re-
ception” section, to tune to the station you
want to record.
3. Insert a blank cassette in the cassette receiv-
er and close the lid.
4. Simultaneously press the RECORD and PLAY
buttons to switch on the record mode.
5. Press the STOP / EJECT button to cancel the
record mode.
Recording on the cassette from a CD
1. Set the
FUNCTION
(4) switch to the AUX(MP3)
position to select playback from a CD.
2. Insert a CD disc into the CD slot and close the
lid.
3. Insert a blank cassette in the cassette receiv-
er and close the lid.
4. Simultaneously press the RECORD and PLAY
buttons.
5. Press the PLAY / PAUSE (13) button to start
playback of a CD or records from the USB-
device you want to record.
4001Instruk_ital.indd 7
4001Instruk_ital.indd 7
22.08.2011 12:00:51
22.08.2011 12:00:51