ENGLISH
6
4. To move to the previous or to the next track,
if the playback is stopped, press the
/
buttons once.
Moving to a certain fragment of the disc
Press and hold the
/
buttons to quickly move to
the certain fragment of the track in the forward or
backward direction (Sound will not be played back
until the
/
buttons are pressed). Press and hold
the
-10/FOL-
or
+10/FOL+
button on the remote
control to move to the previous/next folder.
Use the
/
buttons to select the desired track
in the selected folder.
Repeated playback of a track or a disc
1. To repeat one track press the
REP/RAN
but-
ton once, “REP” will appear on the LCD-dis-
play.
2. To repeat all tracks on the disc press the
REP/
RAN
button twice, “REP ALL” will appear on
the LCD-display
3. To repeat the album press the
REP/RAN
but-
ton
thrice, “REP ALBUM” will appear on the
LCD-display
Note: These functions are active only in the
playback or pause mode.
Random playback
1. To random playback all tracks on the disc,
press the
REP/RAN
button four times in the
playback mode, “PLAY RANDOM” will appear
on the LCD-display.
2. To cancel random playback of all tracks, press
the
REP/RAN
button once again,
“PLAY RAN-
DOM” will disappear from the LCD-display.
Note: These functions are active only in the
playback or pause mode.
PROGRAMMING THE PLAYBACK
You can program playback of tracks in the de-
sired order.
In the CD or MP3-disc playback mode:
1. When the playback of a disc is stopped, press
the
PROG
button once. “PROGRAM”, track
number “P01” will appear on the LCD-dis-
play.
2. Select the desired track, consequently press-
ing the
or
buttons.
3. To store the selected track press the
PROG
button. The number of the track will change
to “Р02”.
4. Programming of the next track: select the next
track, consequently pressing the
or
but-
tons. Then press the
PROG
button to store
the selected track in memory.
5. To playback programmed tracks, press the
PLAY/PAUSE
button.
6. To cancel programmed playback mode press
the
STOP
button or open the disc slot lid, or
set the
FUNCTION
switch to another position.
Note: You can program up to 99 tracks.
Playback of МР3 files from a USB-device
This unit can playback most of MP3 discs but
there are cases when the disc is not played back
due to the settings of the software used for re-
cording this disc. (For instance, if the finalization
of a disc is absent.)
1. Switch on the unit. Set the
FUNCTION
switch
to the AUX(MP3) position.
2. Press and hold the
PLAY/PAUSE
button on
the unit to move to the USB mode.
3. Insert a USB device into the corresponding
jack. The reading will start, and then total
number of tracks will appear on the display.
4. If a USB device is not connected to the USB
jack, “NOd” will appear on the LCD-display.
5. To exit the USB mode, press and hold the
PLAY/PAUSE
button.
6. To move 10 tracks forward or backward,
press and hold the
-10/FOL-
and
+10/FOL+
buttons (to select album press and hold the
buttons).
7. Use the
or
buttons to select the desired
track.
8. Press and hold the
/
buttons for increased
speed playback in the forward or backward
direction.
9. Press the
PLAY/PAUSE
button to playback
the selected track.
10. Press the
PLAY/PAUSE
button to pause play-
back.
11. To resume playback press the
PLAY/PAUSE
button once again.
12. To stop playback press the
STOP
button.
Note: This unit does not support playback
from HDD discs and some MP3 players.
Repeated playback of a track or a folder (al-
bum)
1. To repeat one track press the
REP/RAN
but-
ton once in the USB mode, the current track
will be constantly repeated.
4001Instruk_ital.indd 6
4001Instruk_ital.indd 6
22.08.2011 12:00:51
22.08.2011 12:00:51
