background image

USING A WALL MOUNT

 

 

Caution:

 Any wall mount must bear a minimum of 5x the monitor’s net weight 

to mount safely. The stand must be removed first before mounting this way.

 

1.  Place the monitor face down on a surface that is soft, yet strong 

enough to hold the monitor. 

2.  Use a screwdriver to remove the screws from the four holes on each 

side of the bottom of the monitor’s base. 

3.  Make sure all cables are already connected to the monitor. 

4.  Follow the directions included with the wall mount to fix the monitor to 

the wall. 

 

STORAGE 

 

  Unplug the monitor when unused for long periods of time. 

 

VENTILATION 
 

  Never cover or block the ventilation slots in the monitor. A minimum 

distance of at least 4” inches should be maintained around the unit for 

sufficient ventilation. 

  Never insert any foreign object, metal or liquid into the ventilation 

slots, as this could result in fire or electric shock. 

  Avoid  installing  a  DVR  or  other equipment  too  close  to  the  

monitor. Keep such equipment at least 12” inches away from the 

monitor. 

 

WATER AND MOISTURE 
 

  The monitor should not be exposed to any moisture or liquid.   

  Do not use the monitor near water. 

  Do not touch the monitor or cable with wet hands as this may cause 

electric shock or damage. 

 

CLEANING 

  Unplug the unit from the wall outlet before cleaning.  

  Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for 

cleaning. If dust is persistent, wipe with a slightly damp cloth. 

 

 

IN THE BOX 

 

1 x LCD Monitor, 1 x AC adapter, 1 x VGA cable, 1 x Audio cable, 1 x User 

Manual 

 

CONNECTIONS 

 

Rear Interface 

 

 

 

DC: 

Only use the 12v DC power supply included with the monitor. 

 

HDMI:

  (High-Definition Multimedia Interface) supports digital video and audio 

connections. 

 

VGA: 

15 pin D-sub cable for standard VGA connection. 

 

 Audio IN

 

3.5 mm stereo jack connection for audio input when using VGA /AV 

connector. 

 

VIDEO/AV IN:   

BNC connections supporting composite video inputs from equipment 

such as Cameras or DVR’s. 

 

VIDEO/AV OUT: 

Composite video loop though output – connect a second monitor. 

 

 

4

Summary of Contents for VTM-TLM191

















Reviews: