2. OSD
LANGUAGE:
Select preferred language for OSD.
(En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru)
H-POSITION:
(0-100)
Set the horizontal position of the OSD.
V-POSITION:
(0-100)
Set the vertical position of the OSD.
DURATION
:
(5-60) Set seconds for the OSD to automatically
close.
BACKLIGHT
:
Set power level in use by backlight (HIGH/MID/LOW)
MEM-RECALL
:
Restore all factory defaults.
3. Geometry
H-POSITION:
Set horizontal image position.
V-POSITION:
Set vertical image position.
CLOCK
:
Manually adjust clock synchronisation.
(If the clock setting of your image is not fine-tuned, you may observe periodic
vertical bars of video noise on your image. These bars of noise are usually
adjusted out when an Auto Configuration is performed. If the
bars of noise are still present, this setting can be used
to remove them.
PHASE
:
If the phase of your monitor is not fine-tuned, you may
observe the image being unstable in the horizontal
axis. Use this option to manually correct.
AUTO ADJUST:
Perform an automatic configuration of the Phase,
Clock, vertical and horizontal position.
4. Audio
BASS:
(0-100)
TREBLE:
(0-100)
BALANCE:
(-50 to +50)
SOUND MODE
:
Set user or preset audio configurations.
(User/Standard/Movie/Music)
AVC:
(ON/OFF) Automatic Volume Control
14
