SAFETY CONSIDERATIONS:
•
Don't touch the CCD Chip with your fingers.
•
Use the camera only with 24 VAC power supply.
•
Use a monitor with 75 ohm impedance.
INSTALLATION STEPS:
1)
Mount the camera securely.
2)
Connect video using suitable coaxial cable with BNC-connector.
3)
Connect the camera to a 24 VAC power supply.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
12VDC Power Input Is Not Polarity Protected.
Use extreme caution when connecting 12VDC power to unit.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover. There
are no user-serviceable parts inside. Refer servicing to qualified
service personnel.
Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking it. The camera
could be damaged by improper handling or storage.
Do not expose the camera to rain or moisture, or try to
operate it in wet areas.
Take immediate action if ever the camera does become wet.
Turn power off and refer servicing to qualified service personnel.
Moisture can damage the camera and also create the danger of
electric shock.
Never face the camera toward the sun.
Whether the camera is in use or not, never face it toward the
sun. Use caution when operating the camera in the vicinity of
spot lights or other blight lights and light reflecting
objects.
Do not operate the camera beyond its temperature or power
source ratings.
Do not use the camera in an extreme environment where high
temperature or high humidity exist. Use the camera under
conditions where temperatures are within - 10°C~+50°C.
Do not touch the CCD sensor directly with your fingers.
If necessary, use soft cloth moistened with alcohol to wipe off
the dust.
PRECAUTIONS
INSTALLATION
