7
6.2.2 MAIN menu-2
6.3 SHUTTER/AGC menu
This menu explains how to control/select SHUTTER, AUTO IRIS and AGC to get the best image for high
luminance and the low luminance according to the scene.
For example, to reduce the ‘wash out’ and extend the dynamic range for highlighted scene, you will use
AUTO IRIS in outdoor daylight. This mode may show color rolling or video level hunting
problems in certain lighting condition such as fluorescent lights.
For Flickerless mode which reduces flickers by NTSC cameras under 50Hz light or PAL camera under
60Hz light, MAIN>SHUTTER/AGC>MANUAL>SHUTTER must be set to 1/100 (NTSC), 1/120 (PAL) and
MAIN>SHUTTER/AGC>AUTO>MODE to AUTO IRIS. Normal shutter speed with an auto iris lens should
be set to 1/60 (NTSC) and 1/50 (PAL) for the best sensitivity.
This is a complicated menu so please proceed with care when handling the Shutter.
To enter SHUTTER/AGC menu, press
●
button at MAIN
menu-1
>SHUTTER/AGC.
MAIN menu-2
Default
Descriptions
NR
-
Sets the noise reduction parameters for NR MODE and Y LEVEL,
C LEVEL. See '6.9 NR menu' for details.
MOTION DET
OFF
Sets ON/OFF for enabling/disabling MOTION DET.
See '6.10 MOTION DET menu' for the parameter settings.
PRIVACY
OFF
Sets ON/OFF for enabling/disabling PRIVACY.
See '6.11 PRIVACY menu' for the parameter settings.
LANGUAGE
ENGLISH
Selects 1 out of 7 languages.
CAMERA ID
OFF
Sets ON/OFF for enabling/disabling of ID display.
Factory default ID is Software version of camera.
User programmed camera ID will be lost and restored with Factory default
ID by CAMERA RESET. See '6.12 ID menu' for editing ID.
CAMERA
RESET
Restores FACTORY DEFAULT.
To save the restored parameters, move cursor to 'SAVE ALL' and press
●
button before exiting the setup menu.
BACK
Returns to MAIN menu-1.
EXIT
Exits the setup menu.
To save the changes, move cursor to 'SAVE ALL' and press
●
button
before exiting the setup menu
SAVE ALL
Saves all settings by pressing
●
button when cursor is on 'SAVEALL'
