25
Sets ON/OFF for enabling/disabling of ID display. Factory default ID is Software
version of camera. User programmed camera ID will be lost and restored with
factory default ID by CAMERA RESET.
Up to 40 characters can be input for camera ID.
7-4. CAMERA ID
CAMERA ID SETUP
VER-DN1.0
RETURN
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!”#$%&’(
)_`,¥:;<=>?@\^*↑↓←→/
CLR
CHR1
CHR2
CAMERA ID input line
COMMAND line
POS
Selects the lens type, AUTO or MANUAL. AUTO supports DC auto-iris lens only.
• TYPE
(default: DC): This camera does NOT support video type auto iris lens.
MUST BE SET TO DC ONLY.
• MODE
(default: AUTO):
Lens iris is automatically controlled according to the scene light level.
• ADJUST
: Adjusts lens open control regardless of the light level.
• V
: Flips the video signals vertically.
• H
: Flips the video signals horizontally.
• HV
: Flips the video signals horizontally and vertically.
• SPEED
(default: 30):
Adjusts the iris control speed. The lower value is the faster speed.
If the speed is too slow or fast, the iris control may be unstable.
7-1-1. AUTO
7-2. FLIP :
This function is used to inverse the pictures coming from the camera.
7-3. LCD/CRT
(default: CRT):
7-1. LENS
Selects the correct type of viewing monitor will ensure the most optimal picture.
