Vitek VT-TPTZ10HR-4N, Manual

Page: 30 / 40

Transcendent Series 4.0 MegaPixel IP PTZ Cameras
30
4.3.1 Communication
<COMM>
DEVICE ID 125295
CHECK ID 125288
TARGET ID 000
SOFT PROTOCOL AUTO
BAUD RATE 2400
<COMM
RESET> SAVE
EXIT
F ig4.3.1.1 Fig.4.3.1.2
DEVICE ID : It is only and used to distinct from the ID of other domes.
CHECK ID : Distinguish several domes with same ID. And altering target ID, soft protocol
and baud rate needs to enter check ID in line with the device ID, otherwise altering can’t
be completed.
TARGET ID
: Target ID is available from 001 to 250.
SOFT PROTOCOL : Soft protocol is auto, Pelco-D and Pelco-P available
BAUD RATE : 1200BPS, 2400BPS, 4800BPS, 9600BPS available
<COMM RESET> : As shown in Fig 4.3.1.2, carry out OK to reboot the dome and
communication reset to dial the code and baud rate.
SAVE : Please save the change of communication. After saving, the dome will reboot.
4.3.2 IR Display
WORKING MODE : Working mode has auto, black/white, color selectable. Default is auto.
TESTING TIME : On IR auto working mode and the programmed time, the IR will
execute the programmed action, eg. Switch from day to night or from night to day. The
detection time is from 2s to 15s selectable.
OUTPUT POWER : Output power has 40%,60%,80%,100% for selection!
ILLUMINATION ON : Illumination on is 1 to15 grade selectable and default is 3. On the
auto IR working mode, if the illumination on level is less than the ambient light, the
picture will change to color, the IR illumination will turn off automatically. If the illumination
on level is
<IR DISPLAY>
WORKING MODE AUTO
TESTING TIME 08S
OUTPUT POWER 100%
ILLUMINATION ON 03
AMBIENT LIGHT 09
IR SWITCH ZOOM 06
EXIT
<COMM RESET>
RESET TO DIAL THE CODE
OK