Vitek VT-TPTZ10HR-4N, Manual

Page: 12 / 40

12
2.4.1 System
System:
upgrade the system info, time and maintenance.
System info: The initial interface of system setting is the display interface of system info.
Basic Info : The IPC’s version number, time zone, product series, serial number.
Network Settings : MAC address, IP address, default gateway, subnet mask.
Alarm setting: Alarm server IP, alarm correlation (not used).
NTP setting : NTP server IP.
Video setting:
main stream/sub stream resolution, frame rate, bit rate, I/P rate.
MJPEG videosetting:
resolution, frame rate.
Time: time zone setting, NTP setting, real-time synchronization parameter setting.
Fig 2.24
Time zone setting: select your time zone from the drop down list, click “Save”
NTP Synchronization:
whether to start NTP service. Select to start NTP service,
If NTP service starts, input NTP server address in the IP field, and click
“Save” button. After NTP is activated, the system corrects the time with NTP automatically.
Local synchronization:
set camera time to synchronize with local PC.
Advanced: contains upgrading the device’s software, restoring factory settings and restarting
the system.