Vitek VT-EHP Series, Manal

Page: 44 / 111

VT-EHP
43
SYSTEM SETUP
3. IP ADDRESS
If you have a STATIC IP ADDRESS, you can use this to access your DVR.
A c c e s s i n g t h e D V R
R E M O T E L Y
To access the DVR remotely via IP address, use the WAN IP address of the network the DVR is connected to. (Sometimes
this IP address is referred to as the LIVE, PUBLIC or OUTSIDE IP address)
S te p s :
1. Bring up a browser (ex. Internet Explorer), and type: http://your.static.ip.address:8080 in the address bar.
For example, if your STATIC IP address was 10.10.10.10, you would type: http://10.10.10.10:8080
N O T E : if you changed the webport, you will need to use that number, NOT 8080.
A c c e s s i n g t h e D V R L O C A L L Y
If you are on the same network as the DVR you will need to use the DVR’s IP address to access it.
S te p s :
1. Access the DVR’s main menu by using the remote control, or by using the buttons on the front of the unit.
2. The Setup box will appear. Select “System Setup.”
3. Select “Network.”
4. “IP SETUP” should be selected by default. To the right, you should see the DVR’s IP address.
5. Bring up a browser (ex. Internet Explorer), and type: http://your.DVR’s.ip.address:8080 in the address bar.
For example, if your DVR’s IP address was 192.168.0.2, you would type: http://192.168.0.2:8080
N O T E : if you changed the webport, you will need to use that number, NOT 8080.
If your DVR is behind a router, the IP address listed
here will be a LOCAL address. You can only use
this address to access the DVR locally.
If your DVR is NOT behind a router, the IP address
listed here should be your PUBLIC IP address. You
can use this address to access your DVR from a
remote location.